Les Hunter Automotive Rotors
We have a large range of our own high quality rotors. We can do custom rotors from 10" x .81" (256 x 20.6) to 14" x 1.25" (356 x 32) thick, plus a variety of solid rotors.
All our castings manufactured by an ISO 9002 Foundry
All our racing rotors are heat treated
All our large rotors are curved vane, heavy duty
We can machine rotors to comply with FIA homologated sizes

Wilwood & Coleman Rotors
We stock a good selection of the Wilwood range of rotors. Rotors from Wilwood are available from 10" to 13.06" (250 to 332 mm) and from .75" to 1.38" thick (19 to 35 mm). Wilwood also have a very good selection of solid rotors for Speedway, Drag and Street applications. We have regular shipments from Wilwood and any part that is not a normal stock item can be indented in our next order.
Coleman rotors are special order, machined to custom sizes to suit individual requirements.

OEM Replacement Rotors
Aftermarket Replacement Rotors
We are a distributor for DBA (Disc Brake Australia) disc brake rotors. These rotors are a high quality replacement rotor for OEM specifications, are QS9000 Certified and are available for most makes and models as standard applications. These are available in the DBA longlife, longlife slotted and longlife gold for most applications.

Calipers
Outlaw
Series 2000 and 3000 Billet Calipers.
The Outlaw 2000 and 3000 4 pot calipers are manufactured from aluminium billet and anodised. These are a very smart looking caliper manufactured by Outlaw Disc Brakes. We also use these Outlaw calipers on our racing kits as dictated by customer demand.

Wilwood
Wilwood Engineering have a very large range of calipers - both cast and billet. Most of our kits are based around the Dynalite II and Superlite IIA cast calipers. These above calipers have proved very successful and durable in both street and racing applications. We can supply the billet series calipers at customer's request.

PBR
Due to increasing demand by customers for brake kits utlising a factory style caliper, we can supply certain brake kits using the PBR 2 piston sliding calipers.

Brake Kits
Our business builds a huge amount of custom brake kits to suit a large variety of cars. We work with individual clients and businesses to provide the right type of brake system for the car and application - this is done to provide the client with the most cost effective system.

Kits we have built include:
Holden Commodore - all models
Subaru Legacy
BMW E30, E36
RX3's and 7's - 13" to 16" wheels
Honda
Toyota
Ford Capris and Escorts
Alfas
Plus a lot of one-off specialised kits for Japanese based cars.
Please contact us for information regarding a kit for your particular vehicle.

Ford Brake Kits for Falcon AUII, AUIII & BA Models
Kit includes:
Rotors 332 diameter x 32 mm thick curved vane with 5 face slots per side
Aluminium adaptor hats 6061-T6 machined to suit (non-anodised)
Wilwood 6 pot Billet Superlite calipers
Brackets machined from mild steel plate
Pads choice of:
Polymatrix Q for street, show - low dust
Polymatrix D for high performance street, good grip cold, reasonably temperature
Polymatrix E for high performance street, good grip, higher temperature
Adaptors supplied to fit caliper and take the 10 x 1mm pitch banjo bolt (Hoses not included)
All mounting bolts, rotor bolts, caliper bolts included
(The kit is a bolt on kit that can be fitted to the car with normal hand tools. The kits have not been designed for any specific rim. Will probably require minimum 17” to clear. Some 16” rims may fit)

Subaru Brake Kits for Legacy, WRX etc
Kit includes:
1 piece top-hat style rotor with diameters from 295 to 330 mm, 28 mm thick (picture shows rotor 320 mm diameter x 28 mm) Flat type rotors with aluminium hats also available.
4 pot billet aluminium calipers manufactured by Outlaw Racing Disc Brakes in the USA to our requirements.
High performance street pads - (racing compounds available for clients who may want to participate in club racing)
Caliper Mounting Brackets - all necessary hardware - adaptors for fitment of factory hose (braided hoses available at extra cost)

Toyota AE86 Front Brake Kit
Kit includes:
Utilising 262 x 20 mm thick top hat style rotors that fit to factory hubs; mounting brackets fabricated in-house; all necessary mounting hardware (does not include hoses); Wilwood 4 pot billet aluminium calipers and Wilwood BP10 compound street pads. Kit comes with plain face rotors. Slotted rotors also available. Kit comes with Black calipers – red calipers are also available.

MK II Ford Escort Brake Kits.
Featuring M16 Outlaw Calipers
Les Hunter Racing Products rotors 248 mm diameter x 22 mm thick vented, top hat style that bolts direct to factory hub
Good selection of Wilwood Polymatrix, Raybestos and PFC Carbon Metallic pads available to suit application
Kits also fit MK III through MK V Cortina

Brake Pads
Performance Friction Corp - Carbon Metallic
As used by top leading teams worldwide - INDY CARS, NASCARS, TRANZAMS
'Z' compound: great HP street compound
80 & 90 compound: Medium torque compound. Ideal for boosted cars & Rally/Club cars
83 & 93 compound High torque compound. Great for non-boosted TraNZam, Touring Cars

Wilwood
We stock Wilwood pads in the following compounds:
Polymatrix T - Street / Dirt
Polymatrix E - Street / Dirt
Polymatrix D - High Performance Street / Asphalt Racing / Dirt
Polymatrix C - Asphalt Racing - Circle and Road Racing
Polymatrix B - Asphalt Racing - Circle and Road Racing plus Dirt
Polymatrix A - Asphalt Racing - Circle Track and Road Racing
(For more information on the Wilwood Pads use our link page to their website)
These are generally available off-the-shelf for the Wilwood and Outlaw calipers.

Other Products ...
Braided Hoses & Fittings
Off the shelf braided lines with -3 female ends - stocked in 15", 18" and 21" lengths.
Custom braided hoses made to suit.
OEM style rubber hoses available for custom applications.